Peeling the tape back against itself rather than adjacent to the wall will also help prevent that problem. The direction you pull the tape will depend on where it is relative to the paint. If your tape is below the painted area — like on a baseboard as you paint the wall or on the wall as you paint the ceiling — pull slightly downward.
With tape above the painted area — on crown molding or the ceiling as you paint the wall — pull slightly upward or away from the painted surface. That also ensures the peeled tape doesn't stick on the fresh paint. With this method, you can peel carefully instead of ripping tape off at a degree angle. If the adhesive sticks, you can gently work at 90 degrees, but only do this if necessary.
Check out our guide on removing tape residue if your painter's tape left adhesive behind on a surface. It may be tempting to peel off painter's tape in a rush and see the results of your hard work. But going too fast means you risk damaging all that effort. Instead, for proper tape removal, you should be slow and careful as you peel.
Going slow and steady gives you the chance to double-check your lines along the way. You can also make sure the tape is coming up without taking your paint with it. When peeling painter's tape from a tall, vertical area, it may be tempting to stay on the ground and peel the length of tape right off the wall. Or if you have a long section of tape, you might want to peel it off in one long, satisfying strand. But as the tape you remove gets longer, you have less control.
It's best to work in one-foot sections to remove painter's tape. Now, you don't have to measure out an exact foot. The goal is to work in manageable sections that allow you to focus on peeling slowly and at 45 degrees.
You can then either ball up the tape or rip off sections and discard them as you go. For the most part, the sharp edge of painter's tape should cut through the dried layer of paint as you peel it away. There are a couple of considerations and pro tips that will help you get the best results.
The paint manufacturer should give an indication of the dry time on the can. If you need to apply two coats of paint, the question arises of whether you should peel any tape between coats and reapply, or leave the tape until the second coat is dry. The latter is usually the best course of action as it would be very difficult to retape precisely.
Some can stay up 21 days or more. And no one really wants that! PPM has a wide range of both professional and utility masking tapes for painting jobs.
If you want explore more, browse through our Masking Tape section. We will gladly provide you with a customized solution. Contact us. Ita Eng. Tape you can trust. Share on Facebook Share on Twitter. Table of Contents. What causes a stripped oil drain plug? Why does the drain hole in my fridge keep freezing?
Share Pin Tweet. Previous Post How much does it cost to fix a window off track? Related Posts. Can you iron out creases in paper? How is commercial glass made?
0コメント